Domestic Personal Home Lift that complies with the Machinery Directive 2006 / 42 / EC
Single floor. With a maximum of 4000mm of travel.
230V socket - Plugs into a normal 13 amp power socket.
Self-contained wire rope hoist system located in lift car roof space.
Contemporary ambient lighting with high-quality LED strips.
A minimum upper floor ceiling height of 2250mm is required
Up to 150mm / sec
Single door or Thru-car
Number of Peoples
Due to the vertical, self-supporting stilts, positioning a Stiltz Home Lift into your home is very flexible. It is free standing so no load-bearing walls are required, and you don’t need to worry about window or radiators being in the way. It can tuck into the corner of a room, the stairwell void, on a landing or even in a cupboard!
No visible hoists and no noisy motors. Stiltz Home Lifts’ unique technology means the lift runs using discreet wire rope hoists and built-in drive equipment which is all neatly concealed within the lift car roof space. Meaning more space in your home for you, your furniture and your décor.
Simple Stiltz Home Lifts plug directly into your domestic power sockets. In the event of a power cut, a battery back up will gently return you to the ground until power is restored. To get you from floor to floor, the lift is operated using the intuitive in-car control panel or through remote controls from outside the lift.
Safety Features: To guarantee safe and comfortable usage at all times, each Stiltz Home Lift is equipped with the following safety features as standard:
The half-height door is equipped with a subtle LED light curtain which detects obstacles and gently brings the lift to a stop if the light is crossed. This feature is available as an optional extra with the full height door.
The lift will only move from stationary when the lift car door is fully closed.
The lift has a built-in braking mechanism for safety and comfort.
Sensors positioned to the top and bottom of the lift will automatically stop the lift car immediately an obstruction is detected.
In the event of power failure, the lift car can be returned to the lower floor thanks to a battery back up located within the drive unit.
A built-in load sensor ensures that the maximum weight limit is not exceeded.
The lift car door is secured by a strong locking mechanism which is also very easy to open and close.
Duo + Benefits:
Small Footprint: One of the smallest footprint of any wheelchair lift – covers just 0.8m2 surface area.
Quiet: Powered by a quiet electric self-contained motor – no noisy hydraulics.
Fast Installation: Lifts are made up of modular sections –standard installs take just one day.
Power Consumption: Plugs into normal 13 amp power socket – like any other household appliance.
Unique Guide System: Self-supporting structure – two parallel and vertical guides bear the load of the lift.
Self Contained Drive System: Housed at the top of the lift, out of sight – no need for external power packs.
600(W) X 280(D) X 1000 (H) it can be installed with in 5 meters from the lift
Natural Anodized Aluminum
Hydraulic Domus Lift is suitable for 3 to 4 passengers for application up to G+3. Domus Lift can start from a height of 120mm above the floor level (5inches).
Domus Elevators are available in various dimensions and need to be installed in a civil shaft (3side wall) or alternatively. We can supply all-glass elevators with imported aluminum shaft. The specific advantage of Domus Hydraulic Elevator is it has practically no pit (5inches only) and no headroom. Domus Lift comes with aesthetic interior finishes which can be customized to individual requirements. Our company Celcius Systems has installed in more than 300 units in Andhra Pradesh and this product has also proven to be extremely successful due to its Technical features, aesthetics and low maintenance.
Quiet and easy to install
Power consumption like any household electrical appliance